購物車(0)
我的優惠券
客服中心
登入|註冊
購物車(0)
我的優惠券
客服中心
登入|註冊
prev_semicircle-icon
next_semicircle-icon
line-iconfacebook-iconmessenger-icon
link-icon
云文行銷
review-icon4.4

433遙控器【NT166】簡易複製對拷 小金屬萬能無線對拷電動車庫門遙控器 拷貝遙控器

促銷價 $151 /入
96折後低至
$67.5/入
20入大省方案
$145/入
1入輕量方案
更多優惠方案caret_right-icon
優惠
商品96折
點我複製
chevron_right-icon
review-icon
3.9 ( 37 ) 評價
410 人購買
faq-icon 13 問答
finger-icon 立即搶購
add_cart-icon
dislike-icon
出貨
一般
付款後 2 個工作天出貨
chevron_right-icon
配送
宅配
運費
免運費
chevron_right-icon
付款
信用卡、ATM、超商代碼繳費
chevron_right-icon
保障
退換貨保障・政令宣導
chevron_right-icon
出貨與配送
付款方式
相關保障
優惠
商品96折
chevron_right-icon
相關活動
云文行銷
查看商店

1403

商品

4.4

評價

0.7

出貨天

100%

回覆率

方案
結帳輸入ya96,即享折後優惠
flashlight-icon
fire-icon
單價最超值
fire-icon
20入
$67.5
$70.3
折後價 $1349
$1405
方案
平均
折後價
1
1入
$145
$151
$145
$151
2
2入
$104
$109
$208
$217
3
3入
$90.7
$94.3
$272
$283
4
5入
$79.6
$83
$398
$415
5
10入
$71.5
$74.5
$715
$745
6
20入
$67.5
$70.3
$1349
$1405
選項
433遙控器【NT166】
商品詳情



433遙控器【NT166】簡易複製對拷 小金屬萬能無線對拷電動車庫門遙控器 拷貝遙控器

1、可以對拷的晶片:
2260(所有廠商)、2262(所有廠商)、PT2264、5326(所有廠商)、SC5262、HT600、HT680、HT6207、HT6010、HT6012、HT6014、SMC918系列、527(所有廠商)、1527(所有廠商)、2240(所有廠商)、HCS101、HCS200\HCS201(部分代碼)、HCS300\HCS301(部分代碼)、部分單片機..........
1.Chips could be copied
2260(all manufacturers);2262(All manufacturers);PT2264, 5326(All manufacturers);SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918series,527(All manufacturers);1527(All manufacturers);2240(All manufacturers);HCS101, HCS200\HCS201(part code),HCS300\HCS301(部分代碼), part single chip microcomputer..........
2、清碼方法:
同時按住開鎖與關鎖兩鍵(有些外殼是上行與下行兩鍵),LED指示燈閃爍三下,鬆開按下去的任意一個按鍵,另一個不松,點擊鬆開的按鍵三下,LED指示燈進入快速閃爍狀態,此時記憶體的資料全部清除,清完資料之後的遙控器,無論按哪個按鍵,LED指示燈都是不亮。
2.Code cleaning method:
Press the unlock button and lock button at the same time(some shells are the up button and down button), after the LED indicator light flashes three times, loosen any one of the buttons while the other is kept pressing, then push the released button three times, the LED indicator will enter into the fast flashing status. At this time all the memory data is cleared, the cleaned remote control will not have lighting LED indicator no matter which button you press.
3、對拷方法:
一手持原配遙控器,另一手持對拷遙控器,兩隻遙控器儘量靠近,(理想的是將兩個遙控器零距離邊靠著邊放在桌面上)分別按下所需對拷的按鍵,LED指示燈快速閃爍三下之後快速閃爍,對拷成功,其他按鍵操作方法相同。有些遙控器發射功率較小,應原配遙控器與對拷遙控器背靠背操作,才好對拷。有些操作環境有干擾的,應避開干擾操作,如果對拷不太好使的,清碼以後重新對拷。(特別重要:您手上的遙控器必須能正常工作且與我們的遙控器頻率相同)
1. 3. Copy method
One hand keeps the original remote controller, while another keeps the copy remote control, the two remote controls should be placed as closely as possible (the ideal situation is to put the two remote controls on the desktop side by side with zero distance), respectively press down the copy button, when the LED indicator light flashes quickly after three flashes, this copy is successful, other key operating methods are the same. Some remote control has a smaller transmitting power, so the original remote control should be placed back to the copy remote control to be operated. For the presence of noise, it should avoid interference to operate, If the copy is not successful, it should recopy after clearing code.( Attention:Your original remote control must be able to work and the same as our remote control frequency)
4、新款對拷遙控器特點:
1. 4. The features of new copy remote control
The four buttons could respectively copy four different types of chips, That is a remote control can operate four different types of facilities. The frequency is from 270MHz to 434MHZ and more than ten frequency points. Faster copy data speed, not easy losing code, far distance.
詳細規格

請參見商品詳情

整體評價
3.9
/
5
本分數為該供應商及此商品累計銷售成績之綜合評分
使用簡單
選項:433遙控器【NT166】
2021-09-25
交貨快速,對拷簡單。
選項:433遙控器【NT166】
2021-06-07
看更多評價
go_top-icon